1 I can't tell you how to id the 170-200 apart but I can tell you that the 170-200 have a 5 bolt bellhousing to the tranny and the 250 is 6 bolts...
I was thinking the vw beetle style down draft and port the shishkebab out of the intake hole and drop a scoop over it maybe a cowl and still need...
look in the member forums in the pictures for v-8 cars it's the bar between the motor mounts
If you have access to a lathe polish the yoke also if it's rusty it'll help the seal survive longer
the v-8 belly bar is a round tube about 1 1/4 inch in diameter it's flat on both ends and bolts under the engine between the frame rails with some...
Edelbrock Performer Rpm Heads. 1100 bucks(new from summit) Machine work to correct Edelbrocks "Supposed" bolt on heads 700 dollars (seats didn't...
hrmmmm glad I have a 4guage ground strap from the battery to the block.. then the rest of the cars grounded to the engine still waiting to see...
Nhra has asked them to start removing anti-freeze around here as it slows track cleanup and is slippery.. price you deal with when you don't live...
We need a Tijuana Taxi remake of Jack Roushes pro stocker.. 1. The Tijuana Taxi (1975). The strangest Pro Stocker ever built, I think, is the...
I was refilling my mav to drive it a little this winter (normally I run water and royal purple water treatment as the local tracks don't like cars...
bremerton.. they threw me off the track for going to fast without a helmet >;0 hows the ol airport hooking these days haven't been there in a...
me I'm partial to 73 grills and 72 turn signals other then that least rust better condition car goes.. on the 73 if you are making a cruiser it...
mine was 7/8s on a factory 73 grabber as for the belly bars I dunno it would stiffen the frame but damnedifIknow if it'll fit with the I-6 in there
Note: Going today to get new feeler gages. The old rusty set I have shows #6 piston to have +.007" standoff (extends beyond the deck). The...
funny enough I ran the torker for years on a stock motor it's not as bad as you think, it was originally designed in the mid 70's to fit stock...
I have a 6600 rpm pill in the 2 step now(it's the highest one I have).. I'm thinking of buying a 7000 rpm set.. rpm isn't the issue >;) (love...
funny with a properly built exhaust I'm a 1/4 second faster then open pipes.. consider the extra weight and the ability to listen to the radio I...
I was thinking 4 inch on my flat hood (73 grabbers came flat) but I'll build it like the generic motors cowls (sealed to the hood I'll add a flap...
100 miles and make 3 laps with the hood closed.. good thing the track I plan on racing at is 40 miles away.. does this count ?
good deal normally a low compression on a wind up toy like that makes it a touch "soggy" around town but modern convertors make life happy good...
Separate names with a comma.
