There's a stamp on the block, and it's wired like a 351. It is an 85 block.
Just got the balancer and the flex plate. All cylinders are firing, no miss.
Well when the vibration was first noticed it had a 28oz. flex plate and a 28oz. balancer. I assumed that was the reason for the vibration. There's...
Well I believe it's just the stock cam. Oh yea, come to find out it was not a 50oz. flex plate, it was a 28oz. but when I put a 50oz. on it with...
Vibration update: Well in my search for the vibration problem I found out that the motor is not a 72 302, it's an 85 HO. I've been buying 72 parts...
I do have an x-pipe, not sure if I could test it that way.
I haven't noticed it at the tail pipe at higher RPM's, but I'll check.
Yes I here it out the tail pipe.
I know that I have a misfire, I can here it. It vibrates more in gear stopped than it does idling in park, but when I race the engine slowly the...
The one I'm looking at is EFI out of a truck with the AOD tranny attached. My car was column but I've moved it to the floor. I'm using a 6" lokar...
The guy I bought it from said it and the tranny only had 5000 miles on them. Ive replaced wires, plugs, harmonic balance, motor mount and tranny...
Would a mid 80's 5.0 with an aod tranny bolt up in a 1972 Mav. with minimal fabbing?
I've tried pulling the plug wires one at a time and they all seem to change the idle of the car.. I do here a light tapping noise on the drivers...
Well I have replaced all plugs and wires now and still have a miss and vibration so I'm thinking a burnt valve. Any thoughts?
How long have you had the plugs and wires, and do they seem to work well? I just don't want to go back to a brand that might be crap to start with.
Well, I found one source of my vibration. The number 1 plug wire end connector that sits on the plug came off when I pulled the boot off the plug....
Will do. Thanks.
It's suppose to be a rebuild and it was 5000 miles. When I first got it it was fine. I have been restoring the body, interior and suspension for...
Thanks for your help. I'll be doing this later and let you know.
Well I don't have a tach, but it starts to vibrate more the higher the rpms get.
Separate names with a comma.
