:Welcome: from south central PA.
Yeah, my car sat for 6 months over the winter. Got in, turned the key and it started right up.
Forgot to mention, with the FiTech, and probably other throttle body EFI's too, all 4 barrels work at the same time, unlike a 4-barrel carb where...
I've had some great running carbs on my car but after running EFI I won't go back to a carb. Some think you can just bolt on a "self-learning" EFI...
Mine has a Cobra emblem, was a repop I think was intended to go on the trunk of an AC Cobra.
Looks good! and :Welcome:
Less positive caster will make a car with radial tires steer easier but it will affect the self-centering and feel at highway speeds. Sometimes...
We have a couple around here, both V8's. One is a King Cobra the guy keeps in one of those inflatable plastic bubble car covers and only brings it...
Same here, 289, toploader 4-speed and 8" rear w/3.25 gears in a Grabber blue Pinto wagon. Big snorkle hood scoop, loud side pipes,big tires in the...
I believe it was each cylinder. Quick work with a grinder. Just enough to get a spark plug socket in there. Don't know if you'll have to do this...
Every once in a while I'd have to replace one, they would get brittle from the heat and arc. I should have just put a short piece of header wrap...
IIRC, it was on the driver's side where the spark plugs are directly beneath the header tubes. Had to use Accel "shorty" spark plugs there. Don't...
I ran them years ago, great heads. The only thing I did to my Hooker 6901's was grind a little off the flanges to clear the spark plugs. The spark...
Yeah, I remember years ago Joe Sherman ran some tests on a 700 hp car where they mangled the tail pipes. Didn't make a lot of difference hp wise....
Obviously. But does the pipe maintain the same smooth diameter throughout the bend or does it get crushed to a smaller diameter in the bend?
Are your bends crushed or mandrel?
Good work, definitely will make an improvement. Ford designed their heads with tight angles to fit in their cars with shock towers. I personally...
:Welcome: Hi there. It was good to see another Maverick at Shrewsbury last Friday! There are three others that show up from time to time.
For that price they should come to your house and install it...
Easy way to know a 5.0 roller cam motor is to measure a push rod, should be 6 1/4 inches. It's shorter than a flat tappet push rod 'cause the...
Separate names with a comma.
