I’ve called acouple places and they say I can run either with the bellhousing I have but not to sure if it has the double holes. Instead they were...
yes let me give abit more information. so the transmission is a 1352-169 and the bellhousing code is e6zr-6394-aa. I am running a 157 tooth...
So when I go to order parts can I order any fork? I’m just trying to figure out what parts I need to order all I have is the bellhousing and...
hmm thats weird is that because of the throw?
here is the link to the ram if that helps i just wanna see if this ram will work aswell...
So the pump and hoses are used, but the power cylinder in new.
I don’t have a water pump yet so that won’t be an issue. Do you think it would be safe bet to not get the lines they look the same is there any...
I have the center link and control valve all I need is the pump, hoses, and cylinder. The guy has them all on Craigslist and I wanted to verify...
It came with a c4 but the previous owner put the cable and pedal assembly in
cant belive i forgot to add that haha it is from a 1968 mustang.
Hello, Would the power steering pump, cylinder, and lines work on a 72 mav?
I read on a post that you have to drill a hole at the back of the bell housing because if the way that the linkage would push the fork instead of...
so I have a t5 specifically this model 1352-169 along with the bell housing that goes with it and bolting up to my 302. The previous owner has...
ya i just said car wash to just understand my question alittle better i always wash my cars myself. But still just didnt know if there was a way...
Good afternoon, I was just curious if anyone else feels as if the rooftops aren't that thick and it seems like if you went through a rough carwash...
If I were to get some kB pistons to fix my issue would I have to rebalance if I can get them as close as possible to current weight. I talked to...
yes that’s the other sad thing I was going off my first machinist. As much as I would wanna do the rods I think I’m going to stick with the stock...
I see your point but I preset had the rotating assembly balanced also the rods had been pressed with arp bolts and resized. My issue with that is...
Ya I measured every piston and they all came out to .028
Plus even with the machine work and having to block the deck now I’m still way under a crate engine.
Separate names with a comma.
