That’s true haha but the knowledge I’ve learned from this and experience has been worth it. That’s the main reason I got this car and decided to...
Ok that’s what I thought I am not home at the moment as I moved back for school but he is going to get the block taken care off. Here is my other...
Tell me if I’m wrong but could it be I have a 8.229 deck block?? Because the difference would then be 8.229-8.206= .023 and then add .006 for the...
So I just had to take the piston to deck clearence again and for some reason I got .028. I’m really confused now because I don’t see how this is...
hello I was looking to do the t5 swap and someone locally has a t5 but it is from a 94 v6 it is a world class. My question is would this hold up...
Did you say earlier that a double pump carb wont help my situation? I read in an article that it is what i should probably lean towards?
there are so many mixed opinions here haha
Wow you defiantly know your stuff! Full of knowledge and is much appreciated. I do plan on going about the heads and gasket as you stated mill...
I defiantly don’t have the funds to build a stroker. I know these pistons screwed me from the beginning but it is what it is. Everything has been...
as i said though i will double check those numbers because of micrometer. I am going to post a thread for my restoration on my car because i feel...
Those are two very good questions when I measured the pistons were .006 down in the bore measured that once fully assembled. As for the intake...
Thank you i am going to be doing the final assembly the whole goal of this build was to gain experience and try and do as much as possible so...
Yes, defiantly has been kind of a search for me on the parts I bought the how to rebuild small block ford book an trying to go by it and utilize...
Thanks for the info I have come to the conclusion I am going to be tossing my gasket and investing in a thinner gasket to raise compression. As...
Quick question if I am able to use 1.7 roller rockers in my application are there any major downfalls? I am trying to get this thing to breath as...
The timing cover I have already had a block off plate I was able to get the right dowel pin and installed the eccentric. I am thinking of just...
Quick question I have got the rotating assembly installed but I am at a cross road. I could either use a mechanical or a electric fuel pump. I...
Do you know what year works for the panel to fit into a 1972 grabber?
Good afternoon, My dad and I are building a maverick and have been trying to find the best way to deal with this rusting... We are thinking of...
Talked to my machinist and he agreed in looming into new rods and I ran past the question about clearances and he said it should be fine since...
Separate names with a comma.
