just a quick update the heads are currently at the machine shop and are getting new springs, valves, as well as a 3- angle valve job. Also just...
As for the Edelbrock heads he has said that they have been hot tanked and magged. I am definitely expecting to have to put more money into them to...
The trick flows I were looking at were 1000 but would need to be milled down quit a bit.
I should have mentioned they are used from a Friend of ours for 650 for the pair. The link was just to refer to the heads that they are. He has...
so possible change of plans. My dad and I found a pair of Edelbrock rpm heads, these ones specifically....
do you think I could fix this issue myself or is it best to just let the machinist do this?Keep in mind i do not have the correct tool but could...
what type of number are you getting with this combo? Are you still running it with that c4?
Ya thats probably what it is the machinist who installed them first didnt even have the cam when he was doing it so i will try that first. How...
I just wanted to give this posting a quick update. I have since had some issues which are concerning to me. I had gotten the rotating assembly...
Does it matter if the control valve is made by Bendix?
I took it off pretty much took everything apart to see that the issue was so u think just a rebuild kit would be fine if it’s just missing that...
All the hoses were removed but I have ordered all the components that I am missing. So is there suppose to be that big of a hole on the valve...
So I am in the middle of getting my steering figured out and I noticed that there was major play in my steering so upon inspection I noticed that...
Try to see how far off my pistons are from the stock
Does anyone know the weight of stock piston, rods, etc from a 71 302 block? Can’t seem to find them anywhere and the machine shop has since tossed...
For the transmission I am going to be running a world class t5 and as for the gearing I am not to sure I believe it has the 8” rear end? Haha I...
I would hate to give up some low end torque for top end I do like having the ability to burn the tires off the light haha. Would that second can I...
I reached out to the company who made the kit and they asked if I would like to exchange the camshaft for a different one here are the specs:...
Thats all I had done to the deck was just a clean up pass to prep for aluminum heads. I do plan on investing in all arp hardware As well as new...
Just for everyone’s info this is for a 71 302 block!!! Going into our maverick haha
Separate names with a comma.
