I'm in that category too!
A few points. Bracket racing is a great start. If you put 100% effort into it, you'll learn things that will become absolutely critical if you...
I "may" have a pic or two of mine. It's an old Pulley Engineering cage, that was supposedly designed to clear the stock dash. I don't run the...
Keeping the alternator is good, but it's not necessary, especially if you have very few electrical devices. Some guys want to power EVERYTHING...
Footbraking--Have had tons of .000's. Couple perfect runs. One .000 package during a bye round and one in a final round against a well known...
being oversize can cause a problem, but it's been my experience that they'd have to be really oversize to cause any problem. Even then it's...
Running a drill motor backwards at ~1400 RPM will prime a bone dry (filter and all) 351w in about 5 seconds. 1400 at the oil pump is 2800 engine...
Did I say anything about advertising so and so's converter is better than whats his name's? No. Heck I can grab a credit card & pay whats-his-face...
In the front of the block, the 3 galley plugs. Two are for the lifter galleys. One is for the main galley. If one of those plugs is driven in...
I've seen tons of hear-say about guys who think they know torque converters. I thought this link would be appropriate, especially here in the...
Mustang 2 gets my vote. There is a reason 99% of A-arm style front suspension dedicated drag cars use Mustang 2/Pinto stuff. The other dedicated...
they'll be ok. Still not much seat pressure, IMO, but they should "work". Dunno where I got the idea you were going solid roller? Brain fart...
Find another machine shop! 125 is not NEAR enough for a solid roller. That's about half of the seat pressure most solid rollers need. You'd be...
Belt drive. Could go cam drive but it works fine just like it is.
Don't need it. Not with a Ron's system anyway. Not chasing every last HP. Just bracket racing. Could pick up 1-2 mph at the most with a high...
I am not sure. I had some injection notes from when I was tuning my system and it said "end" and then that number. I assume it is. Ron's was...
Lift means very little. Spring pressure does though. Solid rollers are hard on parts compared to hydraulic. As long as everything's up to...
The only number I can come up with it (805)526-3838
No sir it was REALLY easy to tune. I don't use a high speed, though. But those are easy too. Im not familiar with the high speed on your...
Kind of a loaded question. There might or might not be depending on what you have now. Remember the valve springs for solid roller are quite...
Separate names with a comma.
