Thank you - was confused over the nomenclature, got out the calipers and measured the diameter of the hub on the new granada rotors which came out...
"What year is your mustang?" :facepalm: "I used to have a <insert completely non-related modern car>"
Good Morning, At this point I feel like a broken record with wheel questions but here goes... Bought 4 American Racing Ansen Sprints, which...
88400 Hedmann's here w/ column auto - installer had to tweak them slightly due to a conflict with the pitman arm.
Thanks for the responses - I always want to be learning something new from the members on here as there always seems to be an alternative approach...
Were you satisfied with the unit when it was installed? Neat way to add overdrive but it seems the majority on here go the AOD route. Poking...
There's also the: [IMG] and the Ford Shop Manuals:
I have not seen too many on here do rear discs, was there any issues with hooking up the parking brake or were modifications required?
Putting together a list of items to buy for a front disc conversion on my 5 Lug ,drum brake '73 Comet (mostly stock). From my research on here,...
Keep us in the loop! Would be great if your modifications keep the trunk functional.
There's some more info in this thread: http://mmb.maverick.to/threads/comet-kitten.59050/
I feel young! The comet is 11 years older than me.
I also had to trim mine and add some L brackets. Ended up replacing it after a year with the champion fan to match the new rad Mod. CC339.
So not to hijack this thread but I know there is some annoyance over so many threads asking essentially the same question... I have a lead on a...
Thank you!
Sorry to kick up an older thread - I've sourced Maverick bucket tracks from a '73. Are buckets from a 1969 Mustang Coupe a bolt in on these...
Wow, that's scary!
These posts are helpful, I just wished the tracking was more complete, or maybe confirmation that there was a safe size combo for each rim size...
I took two phillip screws out of the top front already. Will check again.
I want to remove the radio bezel so I can cut it to fit a DIN sleeve for a modern radio, for the life of me I cannot figure out how it is...
Separate names with a comma.
