Centering the filler may be my final option if all else fails. That seems like it may be expensive. I may be able too hire a friend who's a...
I'm planning to install a 19 gallon gas tank, and I'm having some clearance issues with my exhaust. The tank is way offset towards the drivers...
I'm looking for a spot to pass wires through the firewall. I want to get a power line through along with some gauge wires and a steel braided...
I'm into this setup: http://mmb.maverick.to/resources/auxiliary-fuse-box-for-aftermarket-add-ons.254/ I've been looking at fuse boxes with 6-8...
I've been looking into this a bit, and unfortunately I'm a total novice with electrical stuff. I'm not clear on how you would use a relay for...
That sounds like a good idea. That would be a bit more work than I was anticipating . I'd have to put a hole through the firewall. The one I...
I'm planning to hook up some gauges and a new radio, so I've been trying to figure out the wiring under the dash. I'm looking for some good...
It's a 302. I forgot to mention that. I went ahead and filled the gap with permatex gasket maker, just because I needed to get the car back on...
I'm changing out my old somewhat leaky cork oil pan gasket for one of those blue rubber Fel Pro gaskets. I just got the oil pan off, and I found...
I finally had enough time to put in the 10L reluctor and lighter springs, and it feels like a totally different engine. The throttle feels very...
My advance springs finally arrived. I've been trying to remove the 10L/15L reluctor arms from a rebuilt distributor I bought. I removed the...
Wow, thanks for all the info. Right now I'm still waiting on the advance springs and a vacuum gauge I ordered to arrive. I've spent the last few...
I want to get my engine timing dialed in. I discovered when I was having a fiasco with the ignition system, that if I disconnected the vacuum...
I bought a rebuild distributor and swapped out the pickup coil and reluctor, and the problem is solved. It feels like it has a decent amount more...
I've adjusted the timing from 6-14 degrees and I'm not really getting anywhere. Overall it idles rough, and drives rough below 25mph. It's fine...
I guess I was wrong about 6 degrees. I just took the car out an it wouldn't stop dying, The only difference is it's night and it's colder. I...
I've done some adjustment now that it's stopped raining. It was impossible to see the balancer with the light when I was just cranking it over....
I got the pickup coil replaced, and now the timing appears to be way off. I've been struggling to get a good reading with a timing light....
I finally had a chance to replaced the coil and add the resistor, and it still isn't getting any spark. So I took a closer look at the...
Well, for now I just want to get the car up and running and on the road again. I would be interested in a hotter non-resister coil for later. Do...
Separate names with a comma.
