That piece above it is the same as the blue charcoal canister in David's picture. I am not sure if either of those parts in your picture are...
No need to remove it, just bypass the heater core water connections and it will never leak.
Pulled water pump and front cover to address coolant leak.
Is this a factory block and what is the overbore?
I always thought a Torino one would look good, although this one does not have the floor shift provision. [IMG]
Wonder if full synthetic oil would have helped to alleviate any of that?
I used the -C speaker without problem in a 75 Maverick, bolted and plugged right in.
Can't speak for that one, the one I used is C7AZ-18808-C, or for a couple of bucks more you could upgrade to C7AZ-18808-D. They fit like original...
IIRC 7/8.
It is hard to say. I already had the heads sitting around from awhile back, and I put them in the car at the same time as a newly rebuilt 5.0...
Those type of mods may be considered old school, and yes there are more off the shelf performance options available, but there is some...
Originally the Comet only had a Lo horn mounted under the hood next to the wiper wash tank. I added a Hi horn using a C7ZZ-13832-H and moved them...
Yes the inner shaft should slide back and forth some. That is how the steering column was able to collapse in a collision.
I know there are several folks using Hedman long tubes on their cars without fitment issues. My question is for those with factory power...
I have not seen a 4dr that nice in quite some time.
Thanks for the info guys. No doubt AFR\TFS heads would provide better fitment and possibly performance, but this is not strictly about...
Looking good Everett. Is that a Flowkooler pump?
I may have an opportunity to get a set of Boss 302 heads. Has anyone placed one in a Maverick or Comet without shaving the towers and if so is...
Did you already get the water pump off? Some of the pump bolts go all the way though the cover to the block.
I too went from 4 wheel drum to manual disc/drum. That valve you listed is the exact one I am using although I used the original drum valve...
Separate names with a comma.
