I am older than all my vehicles, thank God I do not own a Model T.
What wheels are those D?
That looks like a factory type chain, and it is not a dual roller. If you have tried multiple distributors and the problem persisted, it is not a...
When I converted to floor shift, I used the column collar from a 71 - 73 Mustang.
I also have a Taurus fan, but I did a Ford 3G 130 amp alt upgrade first. You may be able to run it with the stock alternator, but I sincerely...
Riveted means the brake pad is riveted to the shoe, bonded means it is glued to the shoe. If unsure just remove one of the rear wheels and the...
In the Dallas area.
Kyle, what part of Texas are you in?
Best option is to get one for a Maverick. The Mustang grill is 7 1/4" tall and 41" wide. The Maverick is 6" tall and 45" wide.
Give me a few days to make a comparison.
Might be easier to get one for a 70 Mustang and get busy with the cut-off wheel.
Mine is from a 94 Taurus 3.8, but I think they were used from 92 - 95 on 3.8. You can probably still buy the whole assembly new. One of the best...
Switched to front disc a few years back, finally got around to plumbing in the disc/drum proportioning valve in place of the distribution block....
Was just looking at that this weekend. What injection setup are you running?
What kind of setup are you using now? I have been running into the same alignment shop problems as well. Guess I have to learn alignment and add...
The Comet has the dome and map lights. I have seen some people switch over to a clear type lens but I used the same milky white one as original....
Replaced dome and footwell light bulbs with LED, so hopefully the dome light lens will quit getting cooked.
For awhile I had factory Magnum 500's all way around. They were 15x7 4.25" bs with 225/60-15. Never had an issue. Now the fronts are 15 x 7...
Does it move enough to fully open the carb throttle? If so, you're done.
Replaced brake master cylinder, cussed at it.
Separate names with a comma.
