The original rag joint in my car was riveted together, so in order to replace the flexible part of the coupler would have been more work than just...
Repaired backup light switch wiring in preparation for Mustang backup light installation.
Floor or column shift linkage?
These are from an awesome tech article, but they show the kickdown and shift rod connections. This is for a floor shift car. Your transmission...
I like to call it trash. I believe that is for an air pump which would pump air into the exhaust side of the heads to dilute emissions. It is...
FYI - There are 3 bushings for the brake light switch, 2 are basically washers and 1 is a bushing. In my case there was 1 washer so the setup was...
Occasionally if you slam the drivers door the brake lights come on. The wiring and connector to the brake light switch are good, it seems that...
If you have the casting numbers from the crank and water pump pulleys those may be enough to determine if they are usable on a 5.0. Don't get...
The bracket looks very similar to this. [IMG]
My torque converter had a drain bolt on the face of it. The flexplate had a hole to accomodate this bolt so it would not touch the flexplate. So...
On front, I have 15x7 4in back space with 235/60-15. Previously I had 15x7 4-1/4 back space with 225/60-15. I had no problems with either.
Other than leaking it was working fine.
Reinstalled freshly rebuilt power steering pump.
4 1/4 is what my previous Magnum 500 wheels were. I had 225/60-15 on those without a problem.
I have 15x7 4in back space on the front with 235/60-15 no problems 15x8 4 1/4 back space on the rear with 255/60-15 no problems
Replaced this: [ATTACH] With this: [ATTACH]
The top do's for me in no particular order were, Ford Duraspark electronic ignition, front disc brakes, early 90's Mustang 3g 130 amp alternator,...
That butt connector spliced wiring looks like a fire waiting to happen. The swap to an early 90's 130 amp alternator is simple and will do away...
Removed power steering pump for rebuild.
No, sorry. 7 inch diameter.
Separate names with a comma.
