The 70 spring is wrapped the opposite direction than the 71-up spring. [ATTACH] [ATTACH]
Nope
[ATTACH]
I take it that it's hanging in you shop now?
I cut 2 coils from Moog 8304 The ride feels fine. My '06 F150 rides rougher
You don't need the assist spring when using a diaphragm pressure plate. If using the 3-finger plate then it is nice to have.
Melvin's has the switchs....
When I rebuilt the 170 six in my 63 Falcon the machine shop had to vat the block 3 different times to get the passages clean. Machine shop guy...
The last adjustable rocker shaft 200 was the 64 and maybe very early 65 models. Ford went with hydraulic lifters in '63 then used up the...
70-74 Headlight Bucket Bumpers (1st pic) vs 75-77 Headlight Bucket Bumpers (2nd pic). Notice the size of hole that the bucket fits into on the...
46-21/32" http://1bad6t.com/Maverick/repair/DMdriveshaft.html
Unlike electronic display pumps today I do believe the old pumps would jump timing or strip a gear or two trying to keep up being accurate since...
The best that I can remember I had two vacuum lines from the engine going to a 'F' fitting on the firewall...two "IN" and one "OUT" going to the...
Unleaded filler neck has a spring loaded door inside. The older leaded neck doesn't. [ATTACH]
I put '75-'77 unleaded filler neck on my '74 and the problem went away. Comet filler necks use a different bolt pattern than the Maverick's neck...
Here is what the square corner boomerang look like on a Maverick without the rest of the chrome trim. [ATTACH]
Swap filler neck with a late model neck. Comet and Maverick necks uses different bolt pattern. I have no splash-back problem with later filler...
http://www.diecastdepot.ca/?s=maverick&post_type=product
Saw one in junkyard today 4K91L115929
Is this what you're talking about?...
Separate names with a comma.
