I originally did the fluid/filter change last year because I felt like it was acting oddly at the top of 2nd gear. Can't explain it, but kind of...
For now I'll keep driving it and see what happens. TBD!
There's only about 8,000 miles on this rebuild. Mine won't move in ANY gear until... it will.
I have confirmed the detent for each gear is happening as it should, so this has to be internal. The trans was filled with this at rebuild (I have...
Column shift C4, original linkage behind a 302. Engine and transmission have about 10k miles on them. This has happened twice in a month. Once...
I had some issues with doing Jeff's mod to my '71, detailed here: My '71 Build
Hey @HotmarkVII, my buddy's dad took a picture of your car at a local show. I'm in IL but he's down there in FL. Small world.
@mojo - Yes indeed.
Nice work! I originally did a similar setup but in the end bought a Mustang Steve kit because my design did not retain the end of the shaft...
I did a bunch of rooting around the forum this weekend. A buddy of mine bid on G.S. Johnson's old magazine '72 Maverick over the weekend. It did...
There was a (now long dead) discussion on producing one, that apparently involved a prototype - but it was entwined in drama and involved some...
You're probably looking for "Roof rail weatherstrip" or "roofrail" (sometimes windlass). Melvins and Autokrafters has it.
Finished my fuel lines. I destroyed $30 in hardware a few months ago when I started. The solution was a little light oil on the threads of the...
I have the modern driveline "adjustable" clutch master, it is a nice piece: http://mmb.maverick.to/attachments/2020-12-24-08-23-57-jpg.126845/ I...
Love seeing a thread old enough to have a driver's license come back, haha! I am a fan of Seafoam. I usually do a run through the fuel twice a...
This is the issue I was having with the release. Photo shows before I cut it down but, the end of the solenoid hits this stamping point. I might...
I couldn't have finished this project without my new vise to hold the hubs for the longer wheelstuds. I've had a 3" vise that came from a garage...
This newer tap handle I have actually fits a 3/8 ratchet so when my hands started to give out on the 6th hole, I actually palmed the ratched...
Got out of my comfort zone and tapped the modified AJE Foxbody lowering spindles for the caliper brackets today. I did it on the car, two of the...
Moved the clutch master up a couple of inches to unkink the line.
Separate names with a comma.
