I thought about that after I posted. There about 4in higher than stock
Rc-107 with standard spindles[ATTACH]
I'm assuming due to the C8 cast codes that the heads and block where cast late in 68 and machined and assembled in early 69
The block was cast late 68 can't remember exact cast date. It's supposed to be out of a 69 Ranchero. It looks like the numbers jive with what I...
The stamped number on the back of the block behind the intake is 9A235145 anyone know what this means?
We pulled the 69 motor apart yesterday, it's well used but in good shape. The cylinder walls look really good. It has the 8.9 cr pistons. with my...
The rod and main bearings look good. I had 60lbs oil pressure the hole way there.
I found a 69 302 out of a Ranchero, going to go look at it today. I'll rebuild the short block and put my top end on it, should have it running in...
For those who where at the MCCI Roundup Nationals this weekend and helped me out with the motor issue, thank you very much. For those who where...
I have the Weiand Stealth on my 302 very happy with it
This time next week I should be waking up in Washington Pennsylvania....Can't wait. Should be a blast...
Well i installed the 130A 3G 1 wire atl today and i am a happy boy:bananaman: It bolted right in aligned up perfect and with the electric fan,...
Well i took mojo,s advise, Ordered a 130A one wire alternator. It should be here early next week.
Yep it has a good ground. I have one more idea i'm going to try, if that don't work i'm going to 1 wire alt. My new question is, if i drive...
Ok ....I jumped the -A- and -F- wires (per instruction,s on the voltage reg for when there is an internal VR ) and my voltage jumped to 13.7 Volts...
When I increased RPM voltage went down
Shouldn't there be around 14.5 volts when the motor is running? That's why I'm thinking voltage regulator . The battery is only 6 weeks old
Did a voltage test after work today. 13.15v sitting dropped to 12.95v after starting dropped to 12.70v when fan kicked on higher RPM,s voltage...
ah gotcha :tiphat:
I don't know what under drive pulleys are
Separate names with a comma.
