I just used Basko Engines in Gilbert to machine an aluminum block for my Typhoon. I know thats a bit out of your way tho
I had one of these for about 10 years. Was a fun little car to drive. Really handled well. I couldn't justify swapping out the 305 with a 350...
If youre lowered at all, you may run into the sidewall rubbing the fender lip. Im running similar tire size and lowered and I had to roll the...
Yes, made for a Maverick specifically. There may be room for a wider one.
Champion makes a good one. Im using their 3 row with their shroud and fan.
Kept it. Works pretty well. The fan comes on half as much as when I had the stock radiator.
I am using their fan and shroud. Its about a quarter inch away from hitting the bolt on the water pump pulley.
With the 3 row champion I couldnt get my Taurus fan to fit either. Its tight with their fan shroud and fan also. Wondering if you have a lower...
is the distributor spinning? Sorry I have to ask.
That is a nice little project if you can do the work.
I haven't had very good luck with yellow tops. The first one I had was good for 5 years. The last few I had have managed maybe 2 years. Not made...
I have been extremely busy with work and getting ready for the holidays. I am in process of swapping to small bumpers and I dont think I will be...
In for shake shack as long as its not raining and I don't have anything shceduled
I wired mine this way but added a relay to the ground side of the sensor. You are correct. The fan would run until the temperature dropped after...
Anyone need a 70-72 front valence? Pretty straight. I would rather get rid of it locally rather than going thru the hassle of shipping. Will have...
Cruise on Central this saturday. Going with my truck club but bringing the Maverick since my truck is down.
Possibly, depends on the state of my car when the meet is scheduled. Im pulling all my small bumpers, grabber wing and parts out of the attic...
Is fuel getting to the carb? Pull the fuel line off at the carb and crank it and see if fuel comes out. If so then start looking at the carb.
I also have the Champion 3 row. As noted the drain is unusable if you use the stock mounting holes. No big deal as you can just pull the lower...
4 barrel swap was the best thing I ever did to my car. Took a bit of tuning to get the carb setup right. The parts posted previously is close to...
Separate names with a comma.
