Did mine with the Eastwood roller and a heat gun. Didnt have to paint anything.
You are probably going to need to roll the front fender lips so you don't cut the sidewalls. Im running close to the same size but with less drop.
Should have left him a note to find us!
Had this happen to me as well.
I just bought a Champion 3 row. Very nice quality! The only issue is the drain port is not usable. Probably a bit more than you want to spend, but...
I tried posting some above but they dont show up
Good turnout today [IMG] [IMG]
My Holley, new out of the box, had the fuel level way out of adjustment.
I will be there
If I had to do it all over again I would also run the Weiand manifold
I went with a similar setup but used a Holley carb instead. Dont like the edelbrock carbs.
Looks like its still broke.
I dont think so. See if this one is still available. http://mmb.maverick.to/threads/belly-bar-c-4-v-8-cross-member.105129/
Its tight but there is room. I have duals on my 75.
I will be there as well.
Im pretty sure I can make it that date.
They do make one...
I just checked craigslist again as there were a few good pairs of e7 on there that were already rebuilt that I was eyeballing. There were also a...
I used a kit for an early mustang. Had to dent the corners of the rear footwells in one or 2 spots and shorten the bent pipe. Nothing major....
These were the ones I was looking at. Seems like these are almost a direct copy of the 6901
Separate names with a comma.
