Got an internal regulator alternator from a late eighties pick up so I should be good at idle.
After my research I got the FI tech kit, now to take the time to get it hooked up. Holiday travel keeps me away from my garage.
Leaving the carb behind, but not changing the manifold. Any suggestions on brand and type to go with? I have a 306 with a flat tappet cam and a...
looks like a package tray support but I could be wrong
If the shoes are soaked change them also, and clean out the drum and the backing plate.
That has got to be one of the best comebacks ever. Great to hear you had your daughter at the show.
You may need to reform the hard line for the way that the brake lines go to the calipers. Don't ask how I know this (it makes the stopping be a...
I was sorry that I missed those of you who had your cars there. I guess you all went out looking at other cars.
Something useful to do with a four door. I have seen it done on a 68 Chevelle and the right person can pull it off.
I will be there but sadly the car won't be.
check the grounds at each light
I may have to get some.
I believe that there is a 10 psi residual valve in the master cylinder and that will cause the rear brakes to slightly drag. so you can use a...
2005 Excursion powerstoke it hauls my 7000lb. boat and trailer over the mountains over the speed limit and gets 15 mpg to boot.
You need to adjust the timing last as points adjustment will change the timing. If you have a adjustable timing light you can see if the timing is...
If your plugs were black that means the carb was very rich. Is your ignition system working properly. If you still have points are they adjusted...
I believe that the brake lights go through the turn signal hazard light circuit ( the harness in the steering column). Using a test light you...
Don't worry my dads a mechanic I can fix it.
That's funny I still think of it as Pacific State hospital. Used to ride my bicycle through there to avoid part of the hill going to Cal Poly.
Separate names with a comma.
