My car is a street legal track car, have wiped out bearings on a couple of motors all is fine till I start pushing car hard, motor is strong, car...
I have been running a stock front sump 351 pan looking for a deep sump larger capacity pan that fits in stock suspension Maverick.
Having oil starvation issues with my 351w have been running a stock front sump non baffled pan, want to run a deep sump baffled pan what will fit...
Hotrock has some good advice. I replaced a dynoyed 340 horse 302 with a stock stroke 30 over AFR headed 351w no dynoyed numbers on 351 but the...
I run 4.10's with 28 x11.50 tires.
I made my own for my 351 swap if you have some fabrication skills and some patience not so bad.
Previously installed light springs and timing all in by those numbers. Definitely will be trying different settings you know how it is an ever...
Pulled dizzy yesterday took apart there is two slots for advance , I previously had it in the larger slot moved around to smaller slot and...
Going to pull dizzy later today and close up slots will post results when I test, I don't have a track day till mid May.
No vacuum advance using a duraspark dizzy to trigger a McD 6al box, cam specs duration @.050 intake 237 exhaust 247 lsa 112 degrees, rear end...
Trying to figure out my best bet for timing not positive of my targets looking for some suggestions. Fresh 351w swap I used an f4 roller block, 30...
For future reference if anyone is wondering the 28x11.50 ET Streets do fit, the 28x10.50 Sportsman pro's were approx 1/4" from leaf spring ET...
Anyone running 28x11.50 Et Streets was wondering how they fit and what you think of them. I currently have been running 28x10.50 Sportstman Pros...
Welcome from another B.C. guy up on Sunshine Coast. Gerry.
Looks easier to me to start from scratch than modify some.
fixed them.
[ATTACH] Test fit my 351 now to build headers. good thing I already have a hole in hood.[ATTACH] [IMG]
Pretty much what I was thinking. Will pin them for now, new motor built for nos but wanted to stay away from the bottle till I cage car, 500 horse...
Any one know if there is better motor mounts available than stock or who makes best quality ones? I am doing a 351 swap should be 500 horse my...
I run 28x10.50 Mickey Thompson Sportsman pro's on mine tight fit rolled lips. Car runs 8.1 in 1/8th mile 306 t5 trans 411 gears home made slapper...
Separate names with a comma.
