Yeah...not sure how re-engineering an already re-engineered system is going to work out. Everyone making these kits is pretty much designing the...
^^^What he said...as well as vans. I have one sitting in the shop now from a 94 F250 Econoline van...
Same here...good luck with it. Be patient and get it like you want it before you finish weld ANYTHING ;)
All I have are 1/8 mile times...but this past weekend I had a best of 6.49 with a 1.37 60' @ 103 mph. Wallace Calculators says 10.2x @ 12x mph...
Think it used to be an option on the older version of the forum...but went away an "upgrade" or 3 ago.
Are you mounting both shocks in front of the axle? Hard to tell from the pics, but looks that way... Just curious
Looks AWESOME!!!!
Anyone have the size (diameter and length) of the rear shackle bolts for the leaf springs? I think I'm going to go ahead and install the Calvert...
The NSS switch is not disabled on my car...I have one on the aftermarket floor shifter. My issue was with the factory column mounted one that was...
Thanks guys. I left the office, pulled the NSS and cut and spliced the 2 re-ltblue wires together. It cranked fine! It is now at the alignment...
Looking at a wiring diagram...and it looks like the red-lt blue wire is the one I need to be concerned with jumping around the switch. Can anyone...
Need a quick fix guys...has anyone bypassed the neutral safety switch on the column? I have a neutral safety switch on the shifter already, and I...
I got Calvert's rear shocks to try with their split monos. Haven't installed either yet though. You have to order different lower plates or have...
Paul, I'm running low 6.6x's, high 6.5x's in the 1/8th mile @ 102-104 mph. I also run FTI converters in both trans scenarios. Each was built...
Hi Paul, I run the Hoosier 26 x 9 mentioned by the OP. I have a 3.89 geared 9". I also run a PG now with 1.76 low gear. I leave around...
I run 14-14.5 in mine. Hooks well, and no wandering on the top end. I haven't tried lowering mine to see if I gain any 60'...might have to at...
Thanks!
What kind of cam numbers are you running? I'm currently running a 13:1 347, but am thinking I'm going to switch to the Man O War 351 based block...
I used Hedman 88390 on mine, and they cleared the RC107 kit fine. I have an aftermarket Man O War block, but it's just the 302. Looking at the...
Separate names with a comma.
