EXACTLY! If you are serious on a carb that will work now AND later, call Patrick @ Pro Systems and he can set you up.
.......not for the build he described.
Do you still have the sintered bronze filter in the float bowls? If you did, that trash would not be there. In your application, that bronze...
With that gear and tire, I'd go with a VS (750 Holley with ford kick -down) UNLESS you know how to really tune a Holley. If so, a 650 would give...
I mounted my mufflers closer to the collectors so I could exit in front of the tire.[ATTACH]
Works for me.[ATTACH]
As been said more than once......stock HO roller with 1.7s. I run this setup in my 84 Cougar (88 HO engine) with a 700DP on a Edelbrock RPM and...
Had this problem 40 years ago.......bad ground.
http://sbftech.com/index.php/topic,2679.0.html .....stock 302 Comet bracket.
Just my junk. One pic before 3G upgrade and elect fan install and one after the upgrade.
Thanks. I actually took it out today and ran it HARD....second time this year LOL.
15x4 front with custom made 15x12 rears (7 1/2" back space). Having the rims widened was cheaper than narrowing the rear.
I just used a solid mount on the left side and stock on the right side and trans.
I run a very simple set up. Stock alt, water pump and crank from an H.O. My water pump is std rotation and the pulley is non grooved. The picture...
If this is directed to me, I had to open up the wheel wells at the front a bit. This shows my street tires(32"Pro-Trac's) ,but with my 30x12.5x15...
It's the not the most comfortable and if you look closely, you can see where the upper part of the bar hits the floorboard. The setup is designed...
.....this is from the 80s......still good enough to run 11s[ATTACH] [ATTACH] [ATTACH]
I love CID, a carb, and a distributor.....this thing newer ceases to amaze me.....LOL.
Don't feel bad....I'm 61...LOL. You may find the following link helpful in explaining how a clutch works....
In his first post ...."The clutch disc and flywheel were taken off a functioning 87 mustang GT." EDIT: His post isn't real clear. The first line...
Separate names with a comma.
