Make sure you use the proper torque values and sequence to tighten the bolts. I assume that crate engine is a 50 oz balance as that is what the...
They're not even good enough for a 4X4. I had a 400 in my brand new 77 F-250 4X4 and at 36,251 miles, a piston collapsed and upon full tear down,...
.....yup. Here's mine. http://sbftech.com/index.php/topic,36677.msg413916.html#msg413916
Good luck with the new ride John. I remember you were the first member I got a PM from after I joined here. Time fly's by quick. Mark
I have the Lakewood 90/10s, no sway bar, stock front end (with travel limiters) and they do the job good. What does the rest of the suspension...
......duh....I meant the sway bar. Just another brain fart on my end LOL.
I assume the track bar is removed?
Welcome from a 60yr old Comet drag racer in Simcoe Ontario! ......oh ya....NICE ride.
You have the wrong firing order. The HO uses the 351 firing order.....simple mistake.
A light spring connected to the bottom of the bracket on the throttle side is all that is necessary to aid in return. A heavy one WILL bend the...
When you say "just the carb spring" do you mean the on the shaft? If so you should run another spring from the linkage to a point on the manifold...
That's your problem......the brown one is for the 50cc pump...NOT the 30cc that you have. Try the blue pump in the 1st hole.
What type of return spring setup do you have? What color is the secondary pump cam?
I would say NO for various reasons. The axle is rated for 3500 lbs GVWR ....weight of the car and trailer may exceed that. You can move the car...
If you go that route, this may help. http://sbftech.com/index.php/topic,2441.0.html
Is it this one? http://sbftech.com/index.php/topic,2845.0.html
Do the math for cost of the conversion. It might be the same as a CW rotation pump......just a thought.
Give it a break. The 69 Boss ran 14.40s....yes .....on street tires! Remove the factory rev limiter ( set at 6125 RPM for warranty reasons), throw...
Tell ya what. Degree that cam then retard it 4* and get back to me. As said, lets get back to subject on hand or start another thread.
.....26" tire, 4.10s @ 100mph= 5300 RPM.....OUCH. I'm talking MY combo with a stick and a tiny .460" cam. This was way back in 1985 before the...
Separate names with a comma.
