Ouch! :rl:
Thanks for that article! It said a whole lot more than I could! :)
The reason for the canister is to store the fuel vapors. Once the engine is running, the vapors are pulled from the canister and burned. If you...
Actually those help keep your front end in line. I took them off of a Mustang I had and after that the front end would not keep a front end...
If you have standard steel rims, take a block of wood and a decent size hammer and hit the rim where the ridge is around the lug nuts. If your...
My front tag partially obstructs the openings in my bumper, just as yours does. I am missing the left side duct also. I'm not having any heating...
You also can do it quite easily with the head off. Put the first cylinders pushrods into the lifters. With a socket wrench on the crankshaft bolt,...
On the 74 Maverick, the marker lights do not flash with the turn signals, at least mine don't! The link I posted (post 2) will be the right...
This is an easy to read diagram with the wire colors. It should help! http://www.maverickcomet.com/Wiring/Maverick.asp
Kinda reminds me of something "Cheech & Chong" would drive! :rl:
I would bet at least one! :thumbs2:
I understand that! One more thing I can think of, is there a vacuum line port on that cylinders intake runner? If there is and you have a vacuum...
Far out thought, but I once had a 2.3L Mustang that did the same thing. I found a fender washer stuck in the intake port in the head! The car ran...
Could also be the collar where the shift handle goes into. I wouldn't use WD either. It gets very sticky after awhile. I use spray silicone on...
Sure she would!!! :rofl2::rofl2::rofl2:
Yep! Right over the hole. "KC" was talking about a relatively small hole I'm sure! I've used the "split hose" method on quite a few things in the...
X2 :) I would advise getting a valve cover gasket and removing the valve cover to replace the grommet. It will probably disintegrate when you go...
According to this link, you must have a bill of sale and a title to sell a car in Alabama. :)...
In 74 the fuel feed line comes out of the sending unit (lower left side of fuel tank) and has a 6" long hose connecting it to the metal fuel line...
I did exactly this! I put the electric pump in the hose that comes from the sending unit and goes to the metal line up front. I didn't have to...
Separate names with a comma.
