Mc is bench bled Word of advice do not buy that plastic bleeder kit. The lines aren't clear and th fittings are junk
It's possible. I did it alone.
speaking of that switch, some numnuts rigged up a pressure switch for the brakes. So, now I have an extra brass block in the engine bay with wires...
Ok how did you get the pushrod disconnected from the pedal? I have the cotter pin out but the rod won't move enough to the side to slide off the...
Well yea I'm going to remake the lines I just want to be sure they go from the same ports
Hey guys I'm looking up this m.c. just like the old one right? I ask because the big and small fittings on it are reversed.
yes the rear. I have the stock rear end.
Alright thanks for that info. Is that back kit for the Maverick or do you adapt it somehow
Well I went ahead and ordered my discs and a new master. What was different about the lines? The placement? So I'll have to make a new line
Do you have an earlier Maverick? What about if I do a full disc conversion?
I'm still fighting with my current brakes and I'm about to get a new master cylinder. My question is, are the master cylinders different from my...
so the rear drums on this car are now just getting quite a bit warmer than the front on just a simple short drive. I also hear a knocking once in...
f that, I already paid for all new crap. I'm going to try and go disc. I took off the driver drum, the star adjuster lever, spring, and cable were...
thanks. this is not a transmission issue as someone stated. I thought about the ebrake, but I have never been able to pull my ebrake as it is...
I can't even drive it...at all. It got progressively worse. Both back wheels lock up in a forward gear, but don't seem to in reverse. I jacked the...
first one
not sure what you're asking sorry. If I had to guess i think it's the first one.
I got the new starter in. In the little pamphlet they give you it shows a fusible link and/or fuse in the curcuit. Is it necessary to put a...
then don't put a unit producing boost on your 43 year old car stock engine...being real here.
that's great. I was having the same problem...mine turned out to be bent pins in my turn signal switch connector
Separate names with a comma.
