I guess that would be better than plumbers putty in your radiator.
wow thats impressive! I would like to get some more performance out of my 250 since I really want to keep things orignial but don't know where to...
Not sure, I have read in here that some guys prefer the duraspark system.
I just read on some other posts that the wire itself has a resistance built into it. So it sounds like the entire length of that wire would need...
I didn't bypass anything and it works fine but this it as you said because I have the Ignitor-1. I got curious and checked the wiring diagram and...
I attached a photo of mine. The red from the ignitor and the hot from the ignition switch both go to the + side of the coil. The black from the...
The label on the engine says 0.032-0.036 and with the recommended 0.005 increase, that raised the spec to 0.037-0.041 for an average of 0.039. I...
I don't remember if I used a I or II but I pulled my receipt and here is what I used in my 74/250: * Pertronix PRT1261 Ignitor conversion kit *...
sorry your right, it is an aluminum head for the 250...
I saw somewhere that now there is an aluminum intake manifold for the 250 available. Supposedly has smoother and redesigned ports for more even...
I put a Pertronix on my '74/250 and it was super easy and runs great. I also added the recommended upgraded coil and just a new set of stock spark...
I did all mine this summer, beltline window strip, window top channel, door upper and door lower seals. Purchased them from AutoKrafters. The only...
Your were right on target. I didn't get around to it until this cold weather kicked in but the auto choke just needed a slight adjustment. It was...
looks like whatever it hit completely missed the bumper.
ok thanks for the tip. The only major crack is just below the right side of the radio, you can see it in the photo at the top of this thread. I...
I had planned on using two-part epoxy, but the coat hanger rebar is a really great idea! I will be sure to do that. Did you have trouble removing...
Have you ever removed one? I'm pretty sure that if I could get it out without further damage that I could repair the cracks with epoxy putty on...
In reading up on it there is a lot of features to prevent people from trying to cheat. In addition to the weight sensors in the seats there are...
Thanks and yes, I also have a small crack developing to the right of the glove box door as well. I was planning on removing this panel so I could...
Separate names with a comma.
