When I had a foxbody I used edelbrocks ultra flo's combined with an X pipe and it sounded awesome. Nice and quiet too. If I didn't get a good...
I just looked and they don't have them on their website. I did a Google search and Mustang Depot has them listed. Who knows if they can actually...
I believe they are wheel vintiques billet aluminum. I haven't looked into the center cap yet.
17x8 w/ 4 in bs 235-45-17 slight rubbing until I trimmed the lip [IMG]
Thanks for the good info Krazy Comet. For those wondering the price of this all, $550 for the box, $75 for the pitman arm and $75 for the rag joint.
I received the wrong pitman arm, I called ABS and talked to Pedro regarding the issue. Not a problem they have the correct one in stock and will...
I mis spoke on the optima. Per the rule book it needs to be vented. There shall be a metal partition between the battery and the interior (in...
Looks like you have a Taylor box, tech just wants you to vent the battery somewhere out of the car. Your box should have came with a hose that...
Post your time slips, 60 ft., 330ft etc.... Don't forget mph's. Sounds like it hooked off the line and bogged. Glad to hear you had a good time....
What's the rest of your combo? I don't think you will hook without a soft tire. It's time to save up some dough and get a set of drag radials....
I haven't looked into it but I'll set them to what TCP recommends for their suspension.
Inner tube is now separated from the outer. [IMG] I needed at least an inch to be cut so I started there. The end of the original tube is where...
Time to disassemble the steering column. Get your hammer out and go to work by separating the main shaft from the column. [IMG] This is what...
Here's a shot from inside. [IMG] With the rag joint [IMG]
It's not a borgeson box, it's from ABS brakes in southern CA. Although it is similar being that you lose the power ram. The rag joint is...
Here's what's replacing the old power ram. I still have to take the old box out and mick up the new stuff. So some changes will occur from what...
Finished up my fuel lines. [IMG] Started taking out the old front power ram and laid out the new stuff I got. [IMG]
My vette has factory mud flaps-ish. [IMG]
What about a clear bra to protect from rock chips, debris, etc...
Separate names with a comma.
