Got the second coat of primer on the roof and quarters. Fenders, hood, and decklid have filler, self etch, and first coat of primer. Hood also...
Yesterday! http://mmb.maverick.to/threads/fender-re-arching.103021/
After lowering your car tires tend to rub the fender. Here's a solution. Take 3/4" tape and follow the wheel arch of the fender.[ATTACH] then cut...
Craig can we see the rest of that beautiful exhaust system?
Pictures? I want to see a Mav with 18s
So I'm not sure why but the issue is getting better today. After I checked the fuel pressure and purged the guage yesterday it acted a little...
OK just tested fuel PSI. pumps to 40 and stays. 35psi at idle and 30 when u shut it off. Then back to 40 when ignition is on.
I will put a pressure gauge on tonight. Micah what do u suggest there I know the original resistor is still in line and possibly the donors...
From the original coil wire for run and Starter solenoid wire for start. I checked tonight and I have crank signal at dist.
Fuel pump builds pressure, new fuel filter, doesn't matter if its been a week or a minute still cranks long.
OK so I put a EFI 5.0 in my car it runs and drives. The question is why do I have to crank it for about 6 seconds before it fires? It started...
OK, well they came out of my grabber. Just wasn't sure if they were O.E. cause they were done nicely. Better than the rest of the work on the car.
Are these original or something done by PO?[ATTACH]
Got the mud work done, etch primed, and primer surfacer shot last night.[ATTACH] [ATTACH] Next is the quarters
While I'm waiting for the budget for more parts I started on body work.[ATTACH] [ATTACH]there were a few more dents than I expected, however the...
Just a heads up before u build the x-brace get a driveshaft in the car. I was lucky enough that my aluminum shaft cleared by a 1/4" at full droop.
Looks awesome! Keep up good work.
Glass tinted and installed [ATTACH]and a little polishing [ATTACH]
Got the headliner last night. [ATTACH]i used foam bumper wrap as a light insulation before installing the headliner[ATTACH]after install no heat...
Been awhile since I've updated haven't had much time thru the holiday season. But here is the little bit I have [ATTACH]built the alternater...
Separate names with a comma.
