Nothing a cut off wheel and a welder can't fix. That won't be that big of deal to fix.
I've jacked all of mine up from the front cross member and never had a problem. If you are having issues you're car is probably really rusted. In...
Just go out and buy a good Set of aftermarket axles that are alot stronger than the stock ones.then you don't have to worry about breaking one and...
Normally when you have everything apart that black peice just slides right off without much effort. He might have damaged it when pounding on it.
For sure I would also be back to the guy that rebuilt it, you paid him to do it so he should be the one to fix the screw up.
What part did the neighbor pound on? the steering wheel or the black part that the key is on?
If it fits in a flat rate box it's 18$ the box is 12.25x12.25x. 6 ,
It was probably the shift linkage that needed attention, under the hood at the firewall where the colum exits the inside ,then it goes under the...
Pretty much hit the nail on the head ,3.50 would be my choice anything above that and you'll regret it when you want to go somewhere on the street.
Yeah on these cars you really don't need power brakes, the manual brakes stop just fine with verry little effort.
Why would you want to do that
Go back to the guy that rebuilt the trans.if anyone would know what is going on he will if he is a good trans guy
So the aftermarket hood don't fit as good as a stock one? What was off the front and the lines on the rear?
Just get the 302 in the long run you'll be better off.
Yes the ethonal fuel will eat up rubber and will get corrosion in everything else,nothing but shit fuel that we have today
Where did you buy the converter from? And what brand is it?
Yes your best bet is to go with aluminum heads instead of dumping money into those boat anchors.then you have to decide wether to just do the...
Something that is that old and your going to keep it and drive it ,just get everything and replace it all and be done with it. Otherwise you will...
I ran 2.5 I have 6901 hookers and I bought a set of mustang tail pipes and a couple straight peices and flowmasters. Just had to tweek the tail...
Is the water pump turning the right way? The reason I ask is usually with that type of pully it is a reverse rotation and rides on the back side...
Separate names with a comma.
