If he gets it to actually run right he might end up needing them with the added power.
I think there is like 3 steps when turning and pushing in tourqe converter.and like stated earlier if it has a drain plug make sure it is in the...
Caltracs keep the staggered shock set up also
It will hook alot better and eliminate any wheel hop
It's basically adjusting how fast or slow it up shifts from 1-2&2-drive when you're not on the throttle that hard
I used a 157 tooth flex plate o a 89 5.0. You can use a 157. 50oz , normally the bigger one is on trucks.you would be better off with the smaller...
Throw the traction bars in the trash and put some Cal tracs on it
Around me you can find key at fleet farm or Menard's in hardware section also kitz &pfile
That's a oddball one all of mine had the nipple on the end just single one and were adjustable in side of nipple
I'll stick to my timing light. I would do it by ear if away from the shop,but best to go with lightthen you can verify your advance and everything...
Yeah and your electric fan won't be turning for all to long either without the belt turning the alt..especially with one of those Taurus...
You can get them alot cheaper almost anywhere besides Melvin's
Get rid of the big GM cap and won't have a problem. I'm running msd dis and 13" air cleaner fits great.same as z28 pic above
Have a glass shop cut one for you or on eBay or mustang mags
Back in the day they used the early bronco frame.perfect size
Get some mustang reinforcement brackets for mustangs for in the trunk.and the plate lamp is mounted on bumper. Pretty easy swap.
You probably don't want a 10" rim on back.too wide
You hit the nail on the head
Black smoke is not coolant.
Separate names with a comma.
