IIRC Moser will warranty any axle as long as it's not 28 spline. May be wrong (been a while). I've seen that countless times, Strange, OE,...
Hey I see it all the time in summer. Guys racing in shorts. One guy....'69 Chevelle with a 482...drives in shorts but with an SFI...
rear spoiler helped mine at those speeds. Still don't have a front spoiler...or splitter/airdam whatever you call it. 131 at the finish line and...
another thing to keep in mind is that with the small-ish chambers, if you run aftermarket pistons set up for the larger 400 chambers, you'll have...
several: The current maverick....really shouldn't run 5.80's & 90's but it does. 408" 12:1...basically a street engine but on alcohol. My old...
Yep you can do aluminum with a MIG. I've done lots with it. Welds are not as high quality as you'd get with a TIG machine but for what I was doing...
how many 331/347 guys using GM-size rod bearings are going to be upset? How about OE Ford heads with 1.94/1.60 CHEVY valves? :)
I liked the 3.80. With the 4.11 and 3.35 low gear, you'll find yourself going through first gear FAST especially if the engine falls off at...
I wanted rear discs too... by the time I spent the money on the parts (and I did it the CHEAP way), I could have (and eventually DID) spent...
Bishop, you've made good points. Just wanted to clear up that a 408 (at least a windsor) is 4.030 bore and 4.000 stroke. 402" is 4.000 bore,...
No. With a long stroke you don't need domes to get it to 13:1. Small chambers (like most small block heads) and long stroke=lots of compression....
It ain't going to do anything but get worse. Ethanol in fuel now causes lower boiling point. Winter blended fuel even lower (as low as 75-80...
Ain't nothing special really...bolt together off the shelf stuff like AFR225's on a production iron 351 block, with a 4" crank and flat top...
They're never "done". Always working (improving-hopefully) on something.
In a way I agree. But at the same time, Rich is what makes pinks what it is. People know him a mile away. It'd be like Baywatch without Pam :)
I too run front & mid plates. The good: easier to pull the motor. Easier to pull the transmission. Ties the motor to the frame--makes the...
C4's are easy and cheap to rebuild. Get yourself a manual from autozone, library, or most parts stores can hook you up with a good one and go...
sprag broken maybe? About the only thing I can think of. Does it work in manual low gear?
Have you seen the size of a 5.4? Even a 2V 5.4 is wider than a 460. Shorter in length and shorter in height than a 460 (but not by much) but...
Randy yes I got tired of yellow a couple years ago and decided to shave the door handles and clean up some of the nasty body work that I had done...
Separate names with a comma.
