My SLR (or final ratio in low) is 8.5536. Works good on mine. :)
You're going to find out that putting a turbo on a 302 block in a Maverick is quite a bit more challenging than you think it is! Even with the...
Still not going to richen it up any. Besides I don't know if the diaphragm will like 900+ psi on it. Maybe I am not understanding it correctly....
boost referencing a carb isn't going to help on a carb'd "NA" motor. First off, forgive me, but how are you going to pressurize the boost...
IIRC, 5.0 and 5.8 Ford trucks use the same starter. Had one on my old Maverick (302 c4) that I pulled from a '94 F150 5.0 auto. It was the big...
If you want dual batteries, run a couple of 6V batteries and connect them pos to neg, like on a bass boat. You'll have basically one huge 12V...
29 grams? Cripes. Makes me wonder if it's even the right piston. 29 grams of aluminum is a chunk especially when we're talking pistons. I once...
Yes. You are exactly right! I wish I would have went with struts instead. Not the bolt in strut deal like mentioned in previous posts....
This is one of those situations where having a race car is nice, but having it streetable too can cause some headaches
Yes mine is 4 link. Wouldn't have it any other way. My tires are Hoosier 31.5-13.5-15 lightweight. They actually measure 32 x 14. The Hoosier...
IMO, coil overs are cool, but you can only shave the towers down to the upper control arm mounts. The spark plugs are only slightly above where...
Mine is 24". You lose some floor space. My rear seat is RIGHT against the rear crossmember, but keep in mind that I'm 6'5" and I like the seat...
Not the first time I've read of problems with Probe's customer service. :cry:
what are you doing? Street car? Stahl makes a set, called windsor pro-gas A-arm headers, fits windsor based engines. They fit a M2 front end...
depends on the engine power curve. Wide ratios are for very wide power bands (example: 1500 to 6000 RPM). Close ratios are for narrow power...
I have been trying to convince my gf to take a trip over to g ray's. She don't live too far from there...closer than I do. I may run over there...
On the bumps and dents, isn't the rear track width narrower than the front track width? My brother had a '72 that we swapped in a built 400 SBF,...
that's a good kit. I reccomend it :tup:
What block do you plan to use for a clevor? The Cleveland blocks are shorter deck height, which makes it a little more challenging to build a...
Dad runs the same 28x9's on his Fairmont. It runs 6.40-6.60 at 105-107 depending on track/weather conditions. Yeah it can be done. For a heads...
Separate names with a comma.
