I would like to see those 13.5" wide rear tires in stock wheel wells, with stock frame rail locations. I ran 28-10.5s for a while. Those were...
strengthens the block but makes it heavier, makes it run "warm". If you have any decent cooling system, the water temp won't get any higher than...
People have been doing it for years. Yeah it's a bomb and yeah they explode sometimes with a good engine backfire, which is the reason for a...
has anyone noticed that since Nitro has gone to 1000' that the competition is much closer? I love seeing a side-by-side 300 mph race, with only...
The good thing about it is that since my car is already set up for 1000', I can just run over to MMP and go play if I want. Cool. Don't have to...
If you're going to go through the work of the M2 front end, do yourself a favor and just backhalf it. 4 link. Ladders are ok, but its like which...
Mass air 5.0 I assume? You CAN run without them. It will use more fuel, run a little fat at cruise and all other part throttle. Below 160 deg...
I'm with Dummy on this one.
302.:thumbsup:
Wait til you get bit by a magneto like used on sprint cars. MSD doesn't come anywhere close! The mag will knock you down. My chest was hurting...
You need a 4.71 gear....if you can find it. 8" rear, you can get a 4.62 (close enough) and 9" you can get a 4.71, 4.57, or 4.86. 4.71 is not a...
If you use a short tire, you can probably get an 11" wide tire in there without too much trouble. IMO, short tires are just about worthless....
If you play around with enough blocks and find one that has the higher deck height, you CAN use 289/boss rods with 1.600 Compression height. Keep...
I assume we're talking about a 302? The block will break before the rods ever give you a problem. The rod BOLTS though....they aren't the...
Faster than my '03 Lightning... Good job! The converter will help a BUNCH if it's matched to the engine's power curve ;)
88400 shorties. The right side header will fit if it's turned around backwards and installed on the LH side. Dont' know what to do about the...
IHI's or T3's? And how much?
Chassisworks is good. S&W is good. Bickel might have something, and possibly SKRC (skinny kid race cars). If you can find some place local, you...
Some guys like Hyperutectic pistons. To me, they're just cast pistons with a bit more silicon in them. They're STILL cast pistons. And brittle....
The LSx guys hate the 4.6 4 cam motors. Put a turbo on a 4.6 and it will walk on an LSx all day long. 'Course you put a turbo on an LSx and I'm...
Separate names with a comma.
