wiring, and more wiring.
ordered a megajolt ignition controller. sense I already have the crank trigger, cam position sensor( which don't need but it deletes the...
i grounded mine at the lower front right of the 302, nice easy bolt location to the battery then i have a second strap from the body to the battery.
what master cylinder did you use frank?
i did that on my build, and that was the problem and solution.
hi, i moved, argg , again. anybody in this neck of the woods? any good car clubs? thanks arlan
the shop im renting is a low clearence shop so i had to go with this ;( there is a beam in the way. i have enough headroom for working on cars,...
[IMG]
did you loose any turning radius? I lost some in mine. I really need to figure out a way to shorting my steering arms. I am going to fabricate...
for my rear disk brake conversion i took the brakes off of a 98 explorer and redrilled the backing plate. worked great. i have a standard 8in...
if i did that when i was a kid my mother would beat me half to death and my father would also beat me half to death..
hi, am baffeled how people get there engine bay looking all clean. i dont' 'know about you but i have wires running everywhere. tcu / ecu / msd...
wiring, and more rewiring...
where did you get the power window regulators? thanks
hi, will this work. want to install a standard colum. thanks arlan
the relays I am going to use. 12v coil 70amp dual post relays... 1 in post 2 out :) relay: 37702-1AN0022 cooper busseman. m8 and m6 studs....
well I am replacing all the Chinese crap relays in installed in my comet. did some real digging and found some industrial relays. I will post soon...
is the solenoid mounted on the starter. or the old remote style? i had that same issue with a soleonid mounted on the starter. i ended up using a...
for efi, they are pretty minimal for wiring, i have the ezefi and i have a tcm, and still its not bad. im going to relocate my efi into the cab of...
no, i am using a msd 6a and the summit racing distributer that matches. no vac advance.
Separate names with a comma.
