A/C Monte Carlo Bar? I would be up for that, but I have EFI and Sanden pump. Micah
GOOD DEAL, hope that solves it. Just get a rebuilt distributor. By now, that thing is worn out and the shaft is wobbling and effecting your...
Someone correct me if I'm wrong, it has been a while since I had the six banger: Top is retard, bottom (diaphragm) is advance. Micah
First off, if you are correctly setting the timing you need to unplug the vacuum advance from the distributor and plug the hose. If you have not,...
You might try swapping the main jet and metering rod. You can do this without pulling the carb from the motor. Take a look on them to see if they...
An emissions carb would be jetted leaner. Higher elevation would necessitate a leaner mixture. Not sure that the elevation would cause any change...
In your initial post, you said this had been going on for a couple of years. Did this coincide with the purchase of your rebuilt carb? I'm...
Sure! When it comes to working on these cars, we all had to start somewhere. Just keep tinkering and asking questions, you will get there. Don't...
Fenzee, We are pointing you to what needs to be replaced because we know the parts involved. If your friend knew what he was talking about he...
At idle, you might be hearing the PCV operating correctly. If you are getting pinging sounds under load, I would be concerned about detonation....
It is not the pitman arm itself. It is the control valve assembly which contains the parts you need to replace....
When does the rattle occur? Is this detonation on acceleration/load that you are hearing? Micah
Fenzee, It is part of the rebuild kit for your power steering control valve assembly http://www.stangerssite.com/CVparts.html Micah
No issues with the vent tube after 3,000 miles. Is your spillage during fill up? Maybe your line is plugged. Inertia switch is part of the Ford...
They offer a vent tube with a check valve. I connected it to the original vent line to the canister. Micah [ATTACH]
Since I ran my hoses to the front of the tank, I did not have the clearance issues. Micah
What a flat '72 sticker looks like: [ATTACH] Micah
Separate names with a comma.
