Saturday,Oct. 1,if you can get to Waynesboro Va to Eastside dragway,GO.Gear Jammers & Pro Stick are going to race,& I believe Gary(bb466) & his...
I recently found out from a friend that if you use a whole pump set up from an E4OD it has a lower set of gears with it.
Then that is why it is running so good,I did not think it was a 302,it just has too much power.I`d also be willing to bet it has a strong 9in & a...
I watched many of the automatic cars race at MIR yesterday,& the ones with lower stall speeds just got killed of the line.For the first 30 ft just...
Yes that was her car,it was very impressive.She cut good lights & the car ran really strong.I don`t know what she has for power but out through...
Went to MIR yesterday to the legends race & it was a good turn out.Talked to Gary for a little while,he is getting 9.60s out of his car right now...
For me,it is about reliability so I`m going to go with a c6.When I get to the track I don`t want to worry about breaking parts so I`m willing to...
I think the smaller c4 only holds about 7 qts,not sure about the pan fill.I`ve seen ads for racing c4s & some send trans fluid with them & it is 2...
Lightning the car,agood chassis & a higher stall would have easily got you in the 10s.With that 60ft you were leaving a second on the table.
On the older mtrs I don`t like for the temp to get much over 180.Also I would try to use the after market thermostat that sticks open when it fails.
Speed Cooling out of Chicago Ill. makes a nice looking one at a reasonable price but I have no experience with them.Do get a good fan & shroud...
Obviously,Victor Jr. would be the way to go but with out a cowl hood it would not fit.
The N-91 cam is a beast & will work great,but you are going to need the Edelbrock rpm air gap intake for better performance,the rpm unit will suck...
I think the 2.75 & the 1.57 would work pretty well in my car when I get it running.With a 4.56 out back,1st gear equals a 7.71,a neck snapper that...
As long as 1st gear & 2nd are not to far apart in ratio it seems to me the 3 spd is the way to go.That is the prblem with a glide,it only shifts...
If you are going to buy an after market pan get one with a built in windage tray,free 25 HP.
The beauty of a c-4 is that a fully rollerized one built right will hold up pretty well,but they absorb less HP than the rest so your car will be...
Also,if you have over 300 lbs of open valve spring pressure you are going to need screw in studs,guide plates & hardened push rods.As you will...
Get the smallest Thumper cam Comp makes,that should do the trick,Lunati Voodoo will do the same thing.
You can also try TCI & Performance Automatic,I was looking at transmissions the other day & saw them listed by someone just can`t remember who.I`m...
Separate names with a comma.
