bb466s son has a Ranger w/ a 408 in it,turns high 9s,qtr.,they are verylight at about 2200.
Great thing is Maxx,you are having fun & that is what it is all about.I know when I get out there it will be for fun,I don`t expect to be a top...
If you are not using a delay box your reaction time was fantastic.I watched the Piedmont NC race from a couple of weeks ago on MotormaniaTV last...
Install racing springs of some type so the front end will rise quicker.
You could go with higher stall to improve the 60fts & retard the cam moving the rpms up to keep you off the limiter.
Good luck with your build & have fun,as one member on here says,buying a Maverick is easy,restoring one is not.
I saw a test a while back between a thumper & 2 other cams which had wider lobe separations,the thumper made 20 more HP & more torque with the...
408w & never look back,those other cars will never be able to touch you.
Only problem with crate mtrs is sometimes attention to detail gets lost because as a machinist you are under pressure to produce x number of engs....
Try the B303 cam,they are very popular,just a thought.
I guess most after market c4s have the 28 spline shaft?
Yeah,with the 69 & 70 blk. you have to use a 6.200 rod & a 1.280 comp. height piston on a 408 stroker,I know,I also have a std. bore 69 blk. for...
The 69 to 74 blks are the ones you want,if built right they will hold 700HP,the others will not.You can always get the kit to convert it to a...
If you have a v8 & a c4 I`m pretty sure it will be 45 & 1/2 inches for a 2 door.
Make sure you have a good water pump,maybe one with higher flow will help.
They actually say that a Cleveland works better than a Windsor because the exhaust ports tilt lower for a better fit.Through the years there have...
Yeah,a nice little 331 or 347 can really make these small cars scoot on the street,more than enough zip.
Good job,those would be low 10 sec times in the qtr.
It is a real shame you can`t get more than 6200,you`re not even getting full potential from your cam.Good luck to you & have fun,you will...
Wish you all the luck in the world,it is so expensive & hard to build a car right now,I`m getting ready to take a second job to finish mine.
Separate names with a comma.
