Its the idle screw and tha ks to your advice last week i got it all dialed in. But Ive been messing aro7nd with manifold and ported. I went with...
Since ive been learning more and more about how to set the timing and carb and vacuum advance i have a qestion that i cant seem to make sense in...
this is NOT part of the series, but rather a regular how to video for the masses, but towards the end you can hear the 302 running. [MEDIA]
Wow. Larry and Hotrock nailed it. I had time today to adjust the mixture screws and it was a good half turn to far in on the left side and...
Its possible. What should i have iidle set at in park for auto? Ill set what you advise and move timing to 12adv if needed.
Ok this is where im confused then. So i leave it at 12 deg advanced? Fine. When i plug the vacuum advance into the carb the engine immediately...
Ok so i still havent been able to drive the car yet as i cant order the lokar throttle cable until friday, but ive finally got around to messing...
SODE 36 [MEDIA]
ill do this to totally eliminate the possibility. Ill see if i can google the lock pin so i know what to look for. Hopefully its very evident...
I have installed a b&m shifter. What do i need to do to the stock column shift besides removing the handle? I am mostly wondering about the...
Scary when stuff like that happens huh? Im slowly getting mine going. Ive ran out of money and cant drive it until i order a lokar throttle...
Can you tell me exactly how you set yours? I assume you set total at 37-38 at 3000rpms and possible set vacuum canister in the middle?
Ok ive read I can do that as well.
Ok so as I understand it and have gathered from reading all day yesterday here's basically how it goes for a stockish/mild 302. First set base...
It sounds like pure violence when I first start it and the choke isnt open yet. Just screams at you. I love it.
I just subbed you. I have a channel also with a series on my Maverick build on there if you didnt know by now. good luck and if you have any...
Ok. But what about the vacuum advance? Iirc I think I had it maxed out turned all the way to the right with the adjustment screw or close to it. I...
I'm not sure about the cam. This was a crate engine I replaced my original 302 with from my 70 f100. I cant remember exactly but they said it was...
Ok now I'm good. Movwd the wires over 1 post and now I'm in the middle and have enough room to mess with it. Will need to tune the carb slightly...
Yep I'm going to move the wires lol. I'm too jittery right now to pull that dizzy out even though its easy. This thing has seriously messed my...
Separate names with a comma.
