So today at work it hit me. Why dont I try an old plug wire I saved off the 302 when I pulled it from the truck in place of the possibly messed up...
Ok good. I'm kinda relearning here. So help me remember....turning the dist counter clockwise with engine running...is that advance or retard?...
Here's what mine looks like.
I sure will. But do you see my line of thinking? Or am I confused on the placement vs room to adjust?
So i noticed this guys #1 wire is one space over from where mine is. I cannot remember from past experience nor had time to use a timing gun...
I found a 12 volt switched empty space in my fuse box. I had no clue it was there. Thanks all.
I have the plug wires I need on the way but it'll be about a week. I'm going to put the points and condenser back in and work my way from there. I...
The only other thing is that doesnt make sense is that 2 times AFTER I turned the key off I heard a clicking sound that sounded like it was at the...
It said not to use any but I'm going to now. I always have. The one time I follow their directions, it leaks lol.
Yep they're chrome fittings. Ill wire wheel them for sure. And man did it sound mean for 8 seconds! I miss that. Ill get those wire changed first...
So I primed the oil pump and spun it up before install dist. All things hooked up and it ran for about 8 seconds really nice and then quit. I...
Ok that's what I was thinking about doing. The relay I understand. So I run wire from choke to relay... Then I run ground... Then I run wire...
I'm running a summit 4 barrel carb. I need to hook a single supplied wire from the electric choke to a fuse activated 12 volt source. Where is a...
Does the trans line need a full manifold vacuum port or a timed spark vacuum source? Also I have a vacuum gauge in the dash. Is it ok to share...
Ok now I kind of remember. So it'll be like this? Red is bypass hose.....green is heater core......black is heater core on intake? Correct?
So I cant remember on these heater hoses where they go. I think these 2 pictured goes into the water pump correct? And does it matter which? Also...
Thanks all. I had to get the flamer thrower 1. Needed 1.5ohms
Exactly!
Bending trans lines sucks! That is all....
I thought I ran this same set up before but couldnt remember. The worry I have is the instructions say not to use FT2 with the original...
Separate names with a comma.
