If your friend is only looking at 350 HP, the 302 can be built up to get a "reliable" 350 hp! You can buy "turn the key" crate motors that put...
Tell your friend to build a 351w stroker for his 70 Mustang, take advantage of larger engine compartment than our Mav/Comet. Cost wise the same...
The spacer I made was 4 1/4", along with 2 flat washers between the bolt head and spacer, so spacer does not gall under the bolt head. I used...
First, have you determined if the ratio is 2.79? It is highly unlikely, someone would go through all the trouble of installing something like a...
according to your tag WDW-T is 2.79 ratio used in 71-73 Comet/71-74 Mav and is an open diff, not a Trac-Lok.......... Also, Ford Equa or Trac-Lok...
Taken from "how to rebuild your SMALL-BLOCK FORD" by Tom Monroe........... "After 68-1/2 the thread on the stud was reduced in size from 3/8-24...
Yes, you may have those positive stop studs, looks like shoulder below the threads, can not remember what you torque them to, but you seemed to...
Another quick way, tighten until all the up/down movement (play) is taken up, then 3/4 turn. If you have your intake manifold off, look at the...
This is compressor I have........... David [ATTACH]
I thought the price difference between the two would be much more than $70 for something that will last a lifetime.... David
Here are those "poly" type spring perches: http://www.drakeautomotivegroup.com/Store/Product/C4DZ-3388-HP.aspx?wid=141 or you can go all out with...
Where you looking at replacing the rubber pads on the spring perches too? AFAIK, there are only the rubber pads on the perches and I do not know...
Yes, they should fit. David
Weather was sunny and just above freezing, so I decided to do a test fitting of my recently purchased SPC 94210 Upper Control Arms w/built in...
This is the old Holley 4010/4011 series that Summit ended up taking over 10 years ago? I still have mine, great carb with its one piece body, no...
Thanks for the write up/pictures, I was thinking about doing the drop, but was concerned about the reinforcement brace too, your write up will...
What year is your car that you did the drop and was it with the original style upper control arms? Was it the reinforcement plate that angles...
Nice to see more manufacturer's coming out with LED headlights, what did you end up paying? The Truck-lites from my post #55 have gone down in...
for all the hassle, trouble you had, could have purchased a crate motor with a 2 year warranty and driving it......... David
https://www.ebay.com/itm/1970-1971-...h=item2a5d2d4507:g:qL4AAOSwWfda~JrF:rk:1:pf:0 I asked the seller what size rotors, they are 10" x 1" vented...
Separate names with a comma.
