I just followed the advice that I got early on in the thread and drilled 1 inch holes, came out perfect. I still have the car many years later...
I have a 70 maverick with a 200 and 3 speed column. I have had it for years now and my column shifter will tend to bind and honestly I am getting...
So the part number being different on 70 makes sense,probably slightly different. I was able to push it up to get in yesterday, but it was...
I tried that, but it did not want to go. Figured i would ask before I bent it. It’s too pretty to take a chance!
I replaced the stock hood from my 70 maverick with a dynacorn grabber hood. When I went to prop it up I noticed that the prop rod was too long....
The hoses are almost 50 years old, figured it was time . There are no issues with them though
I have a 74, it has a 200 in. six. Wondering If anyone knows offhand what size the heater hose and vacuum lines are as I’d like to replace them....
I purchased the fabric for my 70 from them. It matched perfectly, but faded out pretty quickly (like the original!)
Mustang pans just require trimming, the maverick is just not as wide as a mustang
I did this swap a couple of weeks ago. For the front you need the bumper and the brackets that attach it to the frame, the filler panel that goes...
Once i put some bigger tires on (185/75/14 on there now), i think it will look "right". I dont personally go for the lowered look, i like a stock...
Springs done, the new 70-73 springs were smaller, they were not cut and the ride height is spot on, glad I did not cut them,it makes sense that if...
Thanks for the pics. It helps. I think i am going to see what it looks like with the new springs installed (no cutting) and go from there. I...
That would be great if you could post the pics! I had read all the write ups on bumper swaps and i never saw it mentioned that the springs would...
There is no way this is an illusion, it sits up quite high. I noticed that 70-73 and 74-up have different springs, and that the 74 up are 1.5"...
Hi everyone! I did a bumper swap on my 74 comet recently, and although all the parts installed pretty well and it looks good, i noticed that the...
When i finished installing the front bumper, i thought that it seemed very well tucked in and was wondering what everyone was complaining about!...
Rear view (with the original quarter extensions set in, I am going to install ones from a 70, but these would actually work ok as is
before
I just finished installing the front bumper assembly!
Separate names with a comma.
