Would using pink toyota antifreeze in a sbf cause any issues. I already have about 4 gallons of the stuff and would like to use it if it won't...
I got one today! Every one I've seen is complete gibberish as well.
Is this a 1 piece or 2 piece seal? Felpro brand seals have always been good to me.
When you put the new shoes on did you adjust the shoes to have a slight drag on the drum? The self adjusters are there to help keep the shoes in...
I've been driving mine around for years without a kick down without issue.
They misspelled maverick, I feel insulted they should send me one to make up for my hurt feelings!
I like to set mine at 1/8" toe, between 0 *and -5* camber, and 2* positive caster. Seems to work well for me.
Is this an electronic ignition? Duraspark box may be giving up. May also be an overheating coil.
It may have been what was happening, but the second time round I installed them with blue lock tight and they still broke. Another thing I didn't...
I had that same balancer on my last motor, I sheered the pulley bolts on mine a few times even with grade 8. Also didn't care for the spacers,...
http://www.summitracing.com/parts/pio-872032/overview/make/ford I like these ones, not sure where they're made but seem to be a quality product....
I think that is the same one I have. I think any of the pumps would be a good choice all are reputable pumps, the walbro is the only I have...
Have a walbro 255lph on my car run by itself, seems to work pretty good. Mine is an external pump, but they do make in tank models.
Yes you can use aluminum heads on an iron block. Car company's have been doing that for years.
It'll be fine, seen many guys do this and never have an issue after.
A dial indicator, marking compound, and a dial torque wrench. It's not as hard as people make it out to be. Just follow the instructions and...
My car did this when I had a bad ground on the rad support for the front turn lamps. Just unbolted the grounds and cleaned em with sand paper....
http://www.summitracing.com/parts/slp-260-1731 It says valve seals no included on summit, but there was valve seals in the box. This set is for...
I can get you the gasket set number later this evening. I'm building a 351 and the gasket set I got came with the 8548pt2's.
The 8548pt2 is the standard replacement gasket with a tin fire ring, where as the 9333pt-1's are a "performance" gasket and have a stainless steel...
Separate names with a comma.
