Krazy - Your suggestion was spot on. Once the dash lights were lit up the first wire he checked was the right one. I really appreciate all of...
I stuck my 6'-5" son under the dash last night to track down the wire. He's gotta learn sometime right? :biglaugh: He tested a couple of blue...
Mike - If you only knew how much I appreciate this simple advice!!! :beerchug:
I've been working on my son's 74 comet project and last night spent a few hours with my head under the dash cleaning up some of the wiring that...
When I purchased the car, I was told there's a switch located under the seat somewhere, that won't allow the car to start without someone sitting...
I also took an idea A_Bartle posted up for an overflow reservoir and made a couple minor changes. It was super easy and looks a LOT better than...
We finally got around to getting the front bumper tucked. We took the simple approach and moved the brackets back to the other set of holes and...
I pondered going your route for the reasons you mentioned for quite some time. My concerns were getting a good cut in the stone guard. I agree...
Here's some pics
We moved the bumper bracket to the other set of holes back 2.5" . We cut 2.5" off the front of the stone guard and it worked well. We considered...
I was looking at the stone guard last night and was thinking it would be a whole lot easier to cut it from the front where it's tucked inside the...
We removed the front bumper to tuck it. Per some recommendations by others in the forum, we are going to simply going to use the other set of...
Just got in from lowering the front. Compressed springs make me nervous. I cut a full coil out and it dropped 1.5". Was hoping for 2". Really...
Going to go with the simple approach and move it back to the other set of holes like others suggested. Easy squeaky :) What's the trick with...
Fuelish - is your car lowered, if so, how much front & back? I am currently in the process. Got the rear done last night with a 1" lowering block...
That's pretty sweet !
I'm going with Flowmaster series 40 on the Comet. The drone can live with as it's not going to be a daily driver and will see some track time....
Agreed on the tallness Larry. Make's it look like one of those "Donk" cars. Not a fan !
I offer up this picture as some comedic relief :) I wanted to see what the wheels would look link on the Comet, knowing full well the 255/60r18...
Thanks Bryant & Joe B for the assistance :)
Separate names with a comma.
