Im betting the sending unit has a 5/16 tube but 3/8 would be nice
Just got my holley sniper efi kit in yesterday. Looking forward to starting to install everything Saturday. Really hoping to actually have...
Yeah my thinking too but only thing that changed was rear end and driveshaft. Driveshaft was cut and balanced. I will check out third member when...
So quick check showed 1 degree downward from tail of transmission and 2 degrees upward from rear end. Not sure if thats enough to cause the amount...
Not sure if that helps at all lol
[ATTACH] [ATTACH] [ATTACH]
Should i be looking for anything in particular?
Also seems like now its rich at idle pretty good. Black smoke on start up and when warm idles much higher than when cold. Havent messed with the...
Ok so i remembered a few things. First was i dont recall any vibration or not nearly as much before the 9" and driveshaft went in. Most...
Krazy i just sww what you were saying. That same engine ran in a foxbody with the same trans and no vibration before we had the engine freshened...
Yeah balancer and flexplate are both for a roller engine.
Yeah flex plate is for roller motor. I will pull the converter and swap in a spare and see if vibration goes away
I will try this but that 347 is rocking and rolling might be hard to tell if its vibrating lol
Would a torque comverter cause this? Thinking about it now when i put engine and trans together it took me forever to get the converter to engage...
Tires are 5 years old probably. Sat for about a year
Yes no vibration before that i can recall. However it went through an entire overhaul and sat for about a year so i could be recalling tjat wrong....
Long story short on the 70 I had a driveshaft cut and balanced for the 9" rear end. The rear end was something I just picked up along the way and...
Yeah lol that was me. I need to go to the parts store in the morning and pick up a set of springs for my pro billet.....looked under the cap...
Long story short heres the important stuff 750 aed on a 347 stroker Twisted wedge heads Fresh from the machibe shop Timing set by vac gauge for...
They are straight on my phone.....its crazy. Carb is an aed 750 that was on the 347 when it got dyno tuned. Hopefully no phone calls will be...
Separate names with a comma.
