Big John has climbed back into his FC and with brace's on his wrist and ankle, set top speed and et, at Phoenix yesterday. Got to love the guy, at...
Alway's hits home when something like that happens. A parents worst nightmare, be it the police or the military personnel, knocking on the door....
They may be 1/16th for the top two, or they could even be metric. If you have the brand of piston and even the part number, you can find out...
What are you going to do with the car. street driver, race/street etc? The 9in housing will have to be shortened to 51.5 inches, housing flange to...
Get a 55gal steel barrel and put rollers on a bracket on the bottom. Put a water heater elemen in the side of the barrell as close to the bottom...
I totally agree, Don. When the Super's can still run all the electronic's and Pro's are still foot braking it, seem's a bit one sided. But it is...
Just thought I would let everbody know, that even with us not racing and the Sat. event tried to run on Sunday, the NO/E was won by a Maverick....
Yep, as a spectator, I could see this was never gonna be a good day. Temp was fairly warm but the wind and clouds would not let the high humidity...
Shoot fire Terry, come on down. The owner's are the niceset people you will meet and the track is almost like going to the legendary "George...
Jan 5 Centerville Arknasas is holding a Bracket Combo race. 2008.00 to the winner. Forcasted 62deg. Street and No/E will run together and Super...
A standard output will be fine, also will not have as much drag on the cam and dizzy shaft. Might save a little HP too. On the brand discussion,...
Mavman made a set for his before doing the MII conversion. Bought a box of u bends and straight pipe. Say's he would never do it again though. If...
You have to support the engine so that the tranny mount crossmember can be removed. The bell is probably stuck on the two locating dowels in the...
That's what I said, without the exact numbers, cause every engine is different on the dyno. Course I am just an old retired engine builder who...
Have used both and really not seen much difference. The dogbone idlers are just a few more things to cause friction and having to modify the...
If you are not running high compression ratio and keeping the RPM's reasonable, they should work fine. As time goes on, you may want to do some...
I agree, but if you have a lot of time and energy, you can do it by hand but not recommended. A courser grit compound first, some dykum bluing on...
In a lot of case's, yes but with a backhalved setup that is installed correctly, and a four link coil over suspension, instant center relationship...
I agree with Bluegrass, the key word is "TOTAL". capabilities of a particular engine. Anytime you remove a head, be it iron or aluminum, it should...
90/10 means there is 10% resistance on the upward stroke and 90% on the downward. This helps hold the front end up longer and transfer weight to...
Separate names with a comma.
