6 Cylinder Dual Exhaust Set-Up I'm also using the Inline Six headers with: * Jones Exhaust SXP2SS X-over pipe * Magna-Flow 18124 glass packs *...
Build a HEI Box I converted my DUI box to house an HEI module. It's real easy! I put the DUI into the oven at around 300 degrees. (Bake until...
There is a 4-door posted on Craigs List, in Portland, Oregon.
Welcome!!! From Salem, Oregon. :tiphat:
Retard ! Do it "on the cheap" with an LM555 timer IC = frequency to voltage converter: http://www.circuitstoday.com/f-to-v-converter
Thre 3 Three Oh...you mean these three: There were three different versions of a five-terminal module system, and the modules aren't...
PS: There is a 7-pin HEI Module that includes syphistcated timing features, but the electronics to control it is beyond the scope of "Everyman".
I've never seen nor heard of a 5-pin HEI module. Part number?
Uhhhhh? Not the four connector!!!! a) Ground b) +12V c) Distributor d) Ignition coil.
Duraspark vs HEI Good question. The Duraspark offers a unique feature that the HEI does not. The white wire from the Duraspark connects (can be...
I work in electrical engineering. I changed my 1970 200 cid distributor to a 1976 Duraspark distributor; and modified the control box (gutted) for...
How many gauges? I mounted a 2-gauge chrome bracket (electric oil pressure & water temp) underneath the front package tray, in the center, ahead...
Welcome! Welcome from Salem, Oregon!
Seat Belt Install I used the factory mounting for the pillar loop. But, since I have a 1970 Maverick (which didn't come with the "retractable"...
Seat Belts I bought mine here: http://stores.homestead.com/STREETRODSHOP/StoreFront.bok Good prices!
Found a C.L. Post in Portland, Oregon for a Grabber Hood. He is asking $100. It needs the scoops - I've seen them on e-bay. I looked at it, when I...
I feel your pain with the "After Market" center section. I called the company and sent them many pictures of how it is supposed to be made....
Welcome from Salem Oregon!
Removing Transmission lines You need to use the right wrench specifically for lines: Flare Nut Wrench They are available as open-end or as a...
Separate names with a comma.
