well That's what I'm doing...I asked and the part #'s are the same between the 250 and 302. I think I'll just shim it out more?
so... Is the starter more based on the engin rather than the trans....because I'm using a late model engine, I should use a late model starter...
hey doug This is john C.... Good to hear that your bussy at work. I'll have to up date my page with new pictures of the 302 swap(and fix it all...
Right On......but has anyone experienced this. I was told that the 302 starter and 250six starter were the same
I got some great advice telling me to get the 157 tooth 50oz flex plate from summit. Well, I did that but I used the starter from my...
thanks all Yea, I've learned alot and still am. I guess I get impatient and try to solve everything at once.... When I'm finnished with the...
1 That's the big question.
which wire goes where I forgot I had this question so I don't remember the color of the wires now but I know they arn't the same color selection...
ok so I'll go with a duraspark.....as well as a serpintine setup. Am I to understand that the 68 timing cover will work with this set up?...
how much and where do you get them?
rig it mine don't leak but if they did I would rip out my heater unit and weld and silicone in a patch from under the dash
I would like to wrap-up my engine swap....so I have some questions of sorts. First I was wondering what the best stock points distributor for a...
thanks I think it is the converter too....I just dont see how. Every thing bolted up alright. the drain in the converter is where it should be...
I have the motor in and bolted to the trans....with the torque converter in place. I put one nut on the converter and tried to rotate the crank...
has anyone used a v-belt on a roller motor.....if so what pullies did you use? The crank uses a 4bolt pully.....with the 68 waterpump the...
question Do you have to lift the engine to get thoes in?
you'll have to buy a neutral safty switch that mounts on the transmisssion. It all so runs the reverse light...so I've read in a post. I haven't...
The points where one attaches the alternator bracket to the pump are different.....using alot of washers it can be mounted but the plane in which...
Ok I have two different brackets for the alternator but neither bolt to the crown vic pump that I bought and was told to run by this...
So here it is.....I've made no progress in two weeks. I still need the alternator bracket and pullies. I'm using and was told to use a crown vic...
Separate names with a comma.
