That car looks like it is tubbed ? Got any time slips yet ?
I've never had any problems with chrome moly rings or cast rings if there was ANY crosshatch put on the cylinders . I had one engine that had...
There must be some smoke if there is oil all over the sparkplugs . Oil rings ? valve guides seals ? PCV valve ? cracked intake ?
Is that the same spacer plate and transmission that was bolted to that engine before ?
I knew someone was going to say that .
Or maybe not ....
Did you drill a hole into the evaporator when installing the stereo ?
better do a compression test .
Actually ,now that you mention it . What is the best car cover for outside ? I've never stored my Comet outside but I may have to this year ....
Heres a long shot . The return spring for the starter drive may be broken causing the drive to drift out and grate against the flexplate. It...
I made a tool that holds the pulley . I used an old seatbelt cut to the appropriate length that will go around the pulley and attached it to a...
I had to cut one of the pulleys off to get what I wanted .
You will have to either buy/make the correct pins ,bosses , and other press parts to get them off . Or take them to a machine shop with the...
I think you would have to find the resistance value for the light in the mav then put the correct resistor in the wire . I dont know where you...
All you need to do to make a chevie alt work is hook the small wire coming out of the alt onto the big one BUT it should go through the ignition...
What kind of alternator are you intalling ?
The track that I used to race at was NHRA sanctioned . They were so anal about the rules that a lot of people were turned off . I wish there was a...
I agree with maverick5946 in the situation when you have the faster car and the bagger is slower . Just dial in the same et as him and make him...
Take the big wires off the relay and jump the coil circuit again . It should be clicking , if not then the relay is stuck . Get another one and...
If you mean the inspection cover , I think they are 1/4 " course thread .
Separate names with a comma.
