WAIT if before you do that as long as you didnt hold the unispotter on there to long and compleatly weld the rivit to the metal u can just twist...
Check your intake gasket if its out of place a bit or if its not torqued down properly it can cause low vacuum, and remeber engines wear out as...
You dont need it and id say it doesnt really defeat the purpose of a AUTO you still dont have to clutch or shift several times you only have to do...
Car will not start or run with coil wires reversed it just cranks. also this is not good for a coil ive seen one start smoking and crack. if you...
Unforturnatly if your holley carb does not already have linkage for a ford kickdown you have to buy an entirely new linkage bar(sorry i forgot...
That kind of alinement might work.............ON AN MODEL-T with 1inch wide tires and back when 60mph was crazy talk. Just remeber your tires are...
Did u unhook a vacuum line some where? more specificly the vacuum advace from the carb to the distributor this will affect your idle but if you...
I have later model maverick disk brakes on my 73 and lincoln rear end with disk in the back the differnce is so differn't it is almost...
K&N do make a noticeable differnce BARELY but they do but they allow dirt into your engine as well.(dont waste your time or money with frams knock...
Whats the best way to adjust rockers that are fully adjustable and have hydralic lifters everyone tells me to just turn the nut down untill theres...
I have done this on my 73 with the frount bumper i can take some pics if you want I cut my mounts and moved them back 3.25 inches the bumper...
If you think its the hub caps take them off and drive if it was them the sound will go away. You should hope that is your problem the if its part...
I was just wondering if anyone on this board was going to make a trip to Lethbridge Alberta for Street Machines weekend here its probably one of...
Its new HO firing order but that shouldnt matter one my older 302 that was the old 154 firing order right? i will try adjusting my valves again...
I just put a new cam into my 73 comet 302(stock motor i think) its a mild cam 433 lift and it runs sorta its real hard to start it it backfires...
chances are you have positive stop rockers and as said before you just torque to 17 to 23 foot pounds the only way to adjust they type of rockers...
On a edelbrock or carter competion series carb there is two vacuum ports on the carb can anyone tell me which one is for the distributor i belive...
73 Comet, 302 auto on the floor, black interior. The motor is has 4bbl carb&intake, roller cam,lifters and rockers, dual exhaust. Frount disk...
when i had first got my comet it had been sitting for 15 year so when i went to change the oil the first time i could not get the filter off not...
Its the 154 and i tried that but the wierd thing to me is that its not even back firing and it has spark and compressing and gas. Im thinking im...
Separate names with a comma.
