as mentioned b4. bring up your idle speed. 600 is too low.
mini tub the inside wheel wells. cut out the small radius on the inside behind the back seat, and square up the corners. gives you about 1in moer...
What do you mean, steers itself. ? when you let go of the steering wheel it goes straight?.:hmmm:
Frank you are so vague with the HP rating:biglaugh:.Don't you know all the after market parts sellers can tell you what your HP will be.:rolleyes:...
mine is 347, with flat tops, 58cc heads,custom roller cam,roller rockers,main girdle plus other stuff.???? hehe:rolleyes:
Joe thanks for the PMs. I will measure tomorrow.I had thought of the 50/50. Couldn't find a supplier up here.Have 90/10s up front now.Didn't know...
Cal-tracs fasten to the rearend almost the same as a slapper bar.Now there is a adjustable bar(rod ends at both ends) that runs from the rearend...
Ya frank do as don said. When I pu my Cal-trac stuff,(from a friend), he pu my parts and a install guide from my USA address, and a list of things...
ONLY in the 70s. I wish it was 65 here. Not even close to that. I am thinking of staying in AZ for maybe a couple of months in our winter months...
Don. I have this huge desire, aka bucket list ,to go to firebirdand the other track to have some fun with the TURTLE EXPRESS. My Mav.:yahoo:
Max you are rite about alum bushings. I used new aluminum bushings, on the front, supplied by seller. I was wondering about the rear rubber...
HM JUST did my bushings last nite. The fronts, I used a long threaded rod, with a nut,welded to threaded rod, piece of pipe same dia as sleeve in...
thks for the reply bryant:2thumbs:
Howdy. I'm installing a set of cal tracs. The rear eye bushings (rubber) 4 per side, are in great condition. Does any1 know weather it is...
The Milodon front sump pan,is 11in across the sump.Being 11.75 between suspension parts gives enough clearance. same basic shape as Canton but...
Wow. This debate with Fordman57,Baddad457, Cometgt1974 has got me confused also. Maybe when replying to some1s statement it would be more clear if...
Sorry Alex but at this time I'm not planning on tearing down the motor. It's the original numbers matching block that came in the car from Ford....
Well the stroker kit from Scat came with a 9000 crank,not totally forged, but sufficiant as stated by Scat,s tech people. They were told No power...
Hydrolic lifters . I have always adjusted at 0 lash plus 1/4 turn.:thumbsup:
Well I'm right at this decision now. My first motor, stock, original short block. Edelbrock RPM heads,(190/160). Comp cams 280H ,650hp carb. Good...
Separate names with a comma.
