I've forgotten the exact year (late '70's - early '80's), but Ford switched from 28 oz. imbalance to 50 oz. imbalance for 302's. All 289's were 28...
If your exhaust has black smoke and smells like raw gas, trust me, you're running rich. Keep adjusting, you'll get it right.
Check out the site listed below. It has a lot of great info on carbed rollers and other miscellania....
I have a pair that came out of a '76 Mav that look just like those.
There's nothing like the mellifluous burbble of a V8 exhaust note. It's not like you have to permanently alter anything to make the switch. You...
Your machine shop should be able to measure the deck height for you. Check the attached link for an informative article on the subject of...
That's one way. Maybe a year or so ago, this subject came up and someone posted a reply about using a long wobble extension for a ratchet or it...
Are their prices reasonable ? Anyone know ?
Anyone know which is longer ?
Check the distance from the end of the crank to the beginning of the keyway. Compare that against your old 302 crank. If there's a significant...
Dan, I've always had good luck and relatively few leaks using the paper gasket with a thin coat of silicone on each side of it. As far as...
It sounds like you're saying the keyway in the crank snout is too deep for the key you are using. If you don't have a dial caliper for precision...
Jegs has factory remanufactured carbs at a decent price IMO. Check out the link....
He's living in fantasy land ! If he won't take $250, I'd try to find something else.
What method of clutch actuation are you using / planning to use ?
Shortly after buying my Mav, I pulled the intake manifold off the 302 and found a 10 inch long screw driver in the lifter valley ! Weird, huh.
Sign me up !
Nice ride !
I have the same carb on my car (there when I bought it) and the previous owner had no info on the carb, so I e-mailed Edelbrock and told them my...
I think Old Guy is on the right track. I'd look at the bushings at the forward end of the lower control arm strut rod first, then the upper and...
Separate names with a comma.
